Windshield Wiper Motor Replacement

1. On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.
2. Disconnect battery ground cable.
3. Remove wiper arm assembly attaching nut and wiper arm assembly.
4. Remove pivot link nut.
5. Remove center work hole cover.
6. Remove left work hole cover from engine compartment side of dash panel.
7. Disconnect wiper motor electrical connector.
8. Remove wiper motor assembly with link assembly.
9. Separate link assembly from wiper motor assembly.
10. Reverse procedure to install.
11. On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.