Dashboard Lower Cover

Dashboard Lower Cover Removal/Installation

NOTE:
- When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Take care not to scratch the dashboard and related parts.

1. Remove the driver's dashboard side cover.




2. Remove the dashboard lower cover (A).
1. Remove the screw (B).
2. Gently pull down on the lower cover to release the clips (C).
3. Disconnect the cruise control main switch connector (D), moonroof switch connector (E), fog light switch connector (F), air hose (G), and in-car temperature sensor connector (H), then remove the cover.

3. Install the dashboard lower cover in the reverse order of removal, and make sure each connector is plugged in properly, and the air hose is connected properly.