Front Seat - Manual

Front Seat Disassembly/Reassembly - Manual

SRS components are located in this area. Review the SRS component locations, and the precautions and procedures before performing repairs or service.




Disassemble the seat as shown.

Reassemble the seat in the reverse order of disassembly, and note these items:
- Route the seat wire harness correctly.
- Make sure the bushing and pivot washer are installed correctly.
- Apply multipurpose grease to the moving portion of the seat track.
- To prevent wrinkles in the seat-back cover, stretch the material evenly over the pad.
- If the seat-back pad or the OPDS unit is replaced with new one, reinitialize the OPDS unit.