Mainshaft Bearing/Oil Seal Replacement

Replacement

Special Tools Required
- Adjustable bearing puller, 25-40 mm 07736-A01000B or 07736-A01000A
- Driver 07749-0010000
- Attachment, 62 x 68 mm 07746-0010500
- Attachment, 72 x 75 mm 07746-0010600





1. Remove the mainshaft bearing and oil seal with the special tool and a commercially available 3/8"-16 slide hammer (A).





2. Install the new mainshaft bearing until it bottoms in the housing with the special tools.





3. Install the new oil seal flush to the housing with the special tools.