Housing Tapered Roller Bearing Outer Race Replacement

Replacement

Special Tools Required
- Driver 07749-0010000
- Attachment, 52 x 55 mm 07746-0010400
- Oil seal driver attachment 07JAD-PH80101
- Tapered bearing race installer A 07MAF-SP0011A
- Installer shaft 07MAF-SP0013A

NOTE: Replace the bearing with a new one whenever the outer race is replaced.





1. Remove the bearing outer races from the transfer housing by heating the housing to about 212°F (100°C) with a heat gun. Do not heat the housing more than 212°F (100°C).

NOTE: Some bearing outer races (52 mm and 72 mm) are not press-fitted, and can be removed without heating the housing.





2. Install the 52 mm bearing outer race (A) in the transfer housing (B) with the special tools.





3. Install the 72 mm (A) and 58 mm (B) bearing outer races in the transfer housing with the special tools.