Output Shaft Bearing Removal/Installation
Removal/InstallationSpecial Tools Required
- Driver 40 mm I.D.7746-0030100
- Attachment, 35 mm I.D.7746-0030400
1. Remove the tapered roller bearing (A) from the transfer output shaft (B) with a bearing separator (C) and a press. Place a shaft protector (D) between the transfer output shaft and a press to prevent damaging the shaft.
2. Install the 35 mm thrust shim (A) on the transfer output shaft (B).
3. Install the tapered roller bearing (C) on the transfer output shaft (B) with the special tools and a press.