Service Specifications

Transfer
Diameter of ball bearing contact area on transfer driven gear shaft
Transmission housing side
Standard or New 35.002 - 35.018 mm (1.3780 - 1.3787 inch)
Limit 34.95 mm (1.376 inch)
Torque converter housing side
Standard or New 23.977- 23.990 mm (0.9440 - 0.9445 inch)
Limit 23.92 mm (0.942 inch)
Diameter of tapered roller bearing contact area on transfer shaft
Standard or New 24.987 - 25.000 mm (0.9837 - 0.9843 inch)
Limit 24.93 mm (0.9815 inch)
Diameter of tapered roller bearing contact area on transfer drive gear (hypoid gear)
Standard or New 45.002 - 45.018 mm (1.7717 - 1.7724 inch)
Limit 44.95 mm (1.770 inch)
Diameter of tapered roller bearing contact area on transfer driven gear (hypoid gear) shaft
Gear side
Standard or New 35.002 - 35.018 mm (1.3780 - 1.3787 inch)
Limit 34.95 mm (1.3760 inch)
Locknut side
Standard or New 27.975 - 27.990 mm (1.1014 - 1.1020 inch)
Limit 27.92 mm (1.099 inch)
Transfer gear backlash
Standard or New 0.06 - 0.16 mm (0.002 - 0.006 inch)
Limit Adjust
Tapered roller bearing total starting torque (preload)
Includes transfer driven gear starting torque valve
Standard or New 3.89 - 7.26 Nm (39.7 - 74.0 kgf-cm, 34.5 - 64.2 inch lbs.)
Limit Adjust