Component Tests and General Diagnostics

Forced Starting of Display




1. Slide the passenger's seat (A) forward.
2. Connect the SCS service connector (B) to the navigation service check connector (C) located behind the navigation unit.
3. Turn the ignition switch ON (II).
4. Check that the system starts up and then changes to the "Navi System Link" screen.




5. If the display does not turn on, turn the ignition switch OFF, press and hold the A/C-INFO button (A), push and hold the joystick (B) up, then turn the ignition switch to ACC (I).

NOTE: If the system fails to display the "Navi System Link" screen, refer to No picture is displayed.