Power Seat

Switch Test/Replacement

Driver's Switch ('03 model and '04 model without DPMS)
1. Remove the power seat adjustment switch knobs and recline cover from the driver's seat, then remove the power seat switch '03 model, '04 model.




2. Disconnect the 6P connectors from the power seat adjustment switch (A).
3. Reinstall the adjustment switch knobs to the switch.




4. Check for continuity between the terminals in each switch position according to the table.
5. If the continuity is not as specified, replace the switch.

Driver's Switch ('04 model with DPMS)
1. Remove the power seat adjustment switch knobs and recline cover from the driver's seat, then remove the power seat switch '03 model, '04 model.




2. Disconnect the 12P connector from the power seat adjustment switch (A).
3. Reinstall the adjustment switch knobs to the switch.




4. Check for continuity between the terminals in each switch position according to the table.
5. If the continuity is not as specified, replace the switch.

Passenger's Switch ('04 model)
1. Remove the power seat adjustment switch knobs and recline cover from the passenger's seat, then remove the power seat switch '03 model, '04 model.




2. Disconnect the 12P connector from the power seat adjustment switch (A).
3. Reinstall the adjustment switch knobs to the switch.




4. Check for continuity between the terminals in each switch position according to the table.
5. If the continuity is not as specified, replace the switch.