Second Row Seat Cover
Second Row Seat Cover ReplacementSpecial Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program
NOTE:
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to tear the seams or damage the seat covers
- Put on gloves to protect your hands.
Seat-back Cover
1. Slide the right second row seat forward fully.
2. Remove the pivot bolt cover, and using a T30 Torx bit, remove the pivot bolt from both sides, left second row seat, right second row seat, '03 model , '04-06 models.
3. Remove the armrest, left second row seat.
4. Right second seat: Remove the screw (A), then remove the third row seat access knob (B). Peel off the labels (C), and remove the screws (D), then remove the third row seat access trim (E).
5. Fold the seat-back forward fully, detach the clips (A), and remove the back cover (B). Replace any damaged clips.
6. Release all of the clips (A) from the back of the seat-back (B).
7. Lift and pull out the release button (A), and remove the screw (B), then remove the headrest guide (C).
8. Remove the screws securing the recline lever.
9. While holding the recline lever (A) away from the seat-back cover (B), pull the retainers (C) out from under the lever. From under the recline bracket (D), release the hook (E).
10. Pull back the edge of the seat-back cover all the way around, and release the clips (A), then remove the seat-back cover (B).
11. Install the seat-back cover in the reverse order of removal, and note these items:
- To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the hook and clips.
- Replace any clips (A) you removed with new ones using commercially available upholstery ring pliers (B).
Seat Cushion Cover
1. Slide the right second row seat forward fully.
2. Left second row seat: Remove the left second row seat belt center anchor bolt.
3. Remove the pivot bolt cover, and using a T30 Torx bit, remove the pivot bolt from both sides, left second row seat, right second row seat, '03 model , '04-06 models.
4. Lift the seat cushion (A) up. Release all of the hook strips (B, C) from under the seat cushion.
5. Left second row seat: Remove the seat belt buckle pocket, then remove the left second row seat belt buckle and center second row seat belt detachable anchor complete from the seat cushion.
6. Pull back the edge of the seat cushion cover all the way around, and release the clips (A), then remove the seat cushion cover (B).
7. Install the seat cushion cover in the reverse order of removal, and note these items:
- To prevent wrinkles when installing a seat cushion cover, make sure the material is stretched evenly over the pad before securing the clips and hooks.
- Replace any clips (A) you removed with new ones using commercially available upholstery ring pliers (B).