Third Row Seat Access Cable
Third Row Seat Access Cable ReplacementNOTE: Take care not to bend the cable.
1. Slide the right second row seat forward fully.
2. Remove the pivot bolt cover, and using a T30 Torx bit, remove the pivot bolt from both sides, '03 model,'04-06 models.
3. Remove the right second row seat-back cover/pad from the seat-back frame.
4. Lift the next second row seat cushion up, and remove the outer bracket cover, '03 model, '04-06 models.
5. Disconnect the third row seat access cable (A) at both ends, then remove the cable.
6. Install the third row seat access cable in the reverse order of removal, and make sure the cable is connected securely.