Third Row Seat-Back Recline Cable

Third Row Seat-back Recline Cable Replacement

Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program

NOTE:
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to kink the cable.

1. Remove the third row seat back recline lever.




2. While holding the lever (A) open, carefully pry out the cover (B) with a flat tip screwdriver to release the tabs (C), then remove it.
3. Disconnect the recline cable (D).
4. Install the third row seat-back recline cable in the reverse order of removal, and make sure the cable is connected securely.