Second Row Seat Armrest
Second Row Seat Armrest ReplacementSpecial Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program
NOTE:
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to tear the seams or damage the seat covers.
1. Detach the clips of the armrest panel (A), then pull the panel upward to release the hook (B) and remove it.
2. Using a T30 Torx bit, remove the screws, then remove the armrest (A).
3. Pry the rear hooks (A) up, and release the front hooks (B), then remove the armrest beverage holder (C).
4. Install the armrest in the reverse order of removal, and replace any damaged clips.