Front

Front Individual Map Light Test

NOTE: The microphone for voice control (with navigation) is built into the roof console.

1. Turn the light switch OFF.
2. Remove the moonroof switch.




3. Carefully pry off the lens (A) with a small screwdriver.
4. Remove the roof console (B).
5. Disconnect the 20P connector (C) from the roof console.
6. Turn the interior lights switch in middle (DOOR) position.
7. Check for continuity between the terminals.
- There should be continuity between the No.1 and No.5 terminals, No.2 and No.11 terminals, and No.5 and No.6 terminals.
- With the front individual map light switch ON, there should be continuity between the No.1 and No.2 terminals.

8. If the continuity is not as specified, check the bulb(s) (D). If the bulb is OK, replace the roof console.