Tire Pressure Module: Service and Repair

TPMS Control Unit Replacement

NOTE: Make sure the TPMS control unit mounting bracket is not bent or twisted as this may effect communication from the tire pressure sensors.

1. Remove the dashboard lower cover on driver's side.





2. Remove the clip (A), and disconnect the TPMS control unit connectors (B).
3. Remove the TPMS control unit with the bracket (C).





4. Remove the TPMS control unit (A) from the bracket (B).
5. Install the TPMS control in the reverse order of removal.
6. Memorize the ID of the pressure sensor.

NOTE: Memorize the ID using the HDS, do not memorize automatically.