Fog/Driving Lamp Switch: Testing and Inspection
Fog Light Switch Test1. Remove the dashboard lower cover.
2. Disconnect the 8P (or 5P*) connector (A) from the fog light switch (B).
*: '04 model
3. Pull the fog light switch out from the dashboard lower cover,
4. Check for continuity between the terminals:
- There should be continuity between the No.4 and No.5 (No.1 and No.2)* terminals with the fog light switch OFF.
- There should be continuity between the No.4, No.5 and No.6 (No.1, No.2 and No.3)* terminals with the fog light switch ON.
*: '04 model
5. If the continuity is not as specified, replace the switch.
6. If necessary, check the illumination bulbs (C).