Front Passenger's Weight Sensor Replacement
Front Passenger's Weight Sensor ReplacementRemoval
NOTE: Removal of the front passenger's weight sensors must be performed according to the precautions/procedures.
1. Remove the seat assembly.
2. Remove the tamper-resistant Torx bolts attaching the seat to the weight sensors:
- Manual seat.
- 8-way power seat.
3. Remove the front passenger's weight sensors from the seat rise.
Installation
NOTE: Be sure to install the harness wires so they are not pinched or interfering with other pants.
1. Place the new front passenger's weight sensors on the seat rise.
2. Install the seat onto the weight sensors:
- Manual seat.
- 8-way power seat.
3. Reinstall the seat assembly.
4. Reconnect the battery negative cable.
5. Calibrate the front passenger's weight sensor unit.
6. After installing the front passenger's weight sensors, confirm proper system operation: Turn the ignition switch ON (II): the SRS indicator should come on for about 6 seconds and then go off.