Initialization of the VTM-4 Control Unit

Initialization of the VTM-4 Control Unit
Whenever the VTM-4 control unit is replaced, it must be initialized to make the 4WD system function.





1. With the ignition switch OFF, connect the Honda PGM Tester or the HDS to the 16P DLC (A) located behind the driver's dashboard lower cover.
2. Turn the ignition switch ON (II), and follow the prompts on the Honda PGM Tester or the HDS screen.

NOTE: See the Honda PGM Tester or the HDS user's manual for specific instruction.