Alarm Module: Service and Repair

Immobilizer-keyless Control Unit Replacement

NOTE: Requires PCM code and all of the client's keys.

1. Remove the steering column covers.




2. Disconnect the 7P connector (A) from the immobilizer-keyless control unit (B).
3. Remove the two screws and the immobilizer-keyless control unit.
4. Install the immobilizer-keyless control unit in the reverse order of removal.
5. After replacement, register the immobilizer-keyless control unit, and make sure the immobilizer system works properly.
6. Program all of the client's keyless transmitters.