Exterior Moulding / Trim: Service and Repair

A-Pillar Corner Trim Replacement

Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program.

1. Open the front door.




2. Apply protective tape around the body to prevent damage. Carefully insert a trim tool next to the upper clip, and detach the clip by prying on the A-pillar corner trim (A). Take care not to scratch the body and related parts.
3. Pull the A-pillar corner trim back by hand to detach the remaining lower clips, then remove the trim.
4. Install the trim in the reverse order of removal, and note these items:
- Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
- Push the clip portions into place securely.