Center Panel Trim

Center Panel Trim Removal/Installation

Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program

NOTE:
- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to scratch the dashboard, and related parts.

1. Remove these items:
- Right driver's dashboard panel
- Passenger's dashboard trim panel




2. Gently pull out the center panel trims (A) to release the clips, then remove the trims.
3. Install the trims in the reverse order of removal, and note these items:
- Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
- Push the clips into place securely.