Center Upper Dashboard Panel

Center Upper Dashboard Panel Removal/Installation

Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program.

NOTE:
- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to scratch the dashboard, and related parts.




1. Pry up on the edge of the center upper dashboard panel (A) with a trim tool to detach the clips. Gently pull out panel to release the clips from the dashboard.
2. Install the panel in the reverse order of removal, and note these items:
- Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
- Push the clips into place securely.