Left Driver's Dashboard Panel

Left Driver's Dashboard Panel Removal/Installation

Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program

NOTE:
- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to scratch the dashboard, and related parts.

1. Remove the dashboard side trim, left side




2. Gently pull out the left driver's dashboard panel (A) to release the clip and hook (B), then remove the panel.
3. Install the panel in the reverse order of removal, and note these items:
- Check if the clip is damaged or stress-whitened, and if necessary, replace it with a new one.
- Push the clip and hook into place securely.