Door Lock Switch Test
Door Lock Switch TestDriver's door
1. Remove the power window master switch and disconnect its connector.
2. Check for continuity between the power window master switch 22P connector terminals.
- There should be continuity between the No. 16 and No. 22 terminals when the door lock switch is in the LOCK position.
- There should be no continuity between the No. 16 and No. 22 terminals when the door lock switch is in the neutral or UNLOCK position.
- There should be continuity between the No. 18 and No. 22 terminals when the door lock switch is in the UNLOCK position.
- There should be no continuity between the No. 18 and No. 22 terminals when the door lock switch is in the neutral or LOCK position.
3. If the continuity is not as specified, replace the power window master switch.
Front passenger's door
1. Remove the front passenger's power window switch.
2. Check for continuity between the front passenger's power window switch 14P connector terminals.
- There should be continuity between the No. 1 and No. 10 terminals when the door lock switch is in the LOCK position.
- There should be no continuity between the No. 1 and No. 10 terminals when the door lock switch is in the neutral or UNLOCK position.
- There should be continuity between the No. 1 and No. 12 terminals when the door lock switch is in the UNLOCK position.
- There should be no continuity between the No. 1 and No. 12 terminals when the door lock switch is in the neutral or LOCK position.
3. If the continuity is not as specified, replace the front passenger's power window switch.