Rear Seat Cushion Cover/Pad

Rear Seat Cushion Cover/Pad Replacement

NOTE:
- Put on gloves to protect your hands.
- Take care not to tear the seams or damage the seat covers.
- The left seat cushion is shown; the right seat cushion is similar.

1. Remove the rear seat cushions.




2. Release the hook strips (A) of the seat cushion cover (B) from the seat cushion frame wire.




3. Pull out the seat cushion frame (A) and cushion undercover (B) from the seat cushion cover/pad (C) to separate them.
4. Release the hook strips (D) from the frame wire (E).




5. Remove the under cover (A) from the frame (B). Take care not to damage the cover.




6. Pull back the edge of the seat cushion cover (A) all the way around, and release the clips (B), then remove the seat cushion cover.




7. Install the cover in the reverse order of removal, and note these items:
- To prevent wrinkles when installing a seat cushion cover, make sure the material is stretched evenly over the pad before securing the clips and hook strips.
- Replace any clips (A) you removed with new ones. Install them with commercially available upholstery ring pliers (B).