Cylinder Head Cover Removal

Cylinder Head Cover Removal

1. Remove the charge air cooler.
2. Remove the fuel injector cover.





3. Remove the four ignition coils.
4. Remove the power steering hose bracket (A), breather hose (B), and dipstick (C).





5. Remove the bracket mounting bolts (D) from the cylinder head cover.
6. Disconnect the rocker arm oil control solenoid connector (A), rocker arm oil pressure switch connector (B), and variable valve timing control (VTC) oil control solenoid valve connector (C), then remove the harness clamp (D).





7. Disconnect the air fuel ratio (A/F) sensor connector (A), oil pressure switch connector (B), and crankshaft position (CKP) sensor connector (C), then remove the harness clamps (D).





8. Remove the cylinder head cover.