Driver's Switch Panel

Driver's Switch Panel Removal/Installation

Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program.

NOTE:
- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to scratch the dashboard, and related parts.




1. Remove the driver's switch panel (A).
1. Pull out the bottom of the panel to release the clips, and pull it down to release the hooks (B).
2. Disconnect the power mirror switch connectors (C) and VSA OFF switch connectors (D).

2. Install the panel in the reverse order of removal, and note these items:
- Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
- Push the clips; into place securely.
- Make sure the connectors are plugged in properly.