Removal and Replacement
Fuel Tank Replacement1. Drain the fuel tank.
2. Reinstall the fuel tank unit without connecting quick-connect fittings and fuel tank unit 4P connector.
3. Disconnect the secondary fuel gauge sending unit 4P connector.
4. Remove the fuel fill pipe cover (A).
5. Disconnect the quick-connect fitting (B).
6. Lift the vehicle, and support it with jackstands.
7. Disconnect the fuel fill tube (A) from the fuel tank. Slide back the clamp, then twist the tube as you pull to avoid damage it.
8. Disconnect the fuel vent tube (A).
9. Remove the exhaust pipe.
10. Remove the propeller shaft.
11. Remove the fuel tank cover (A).
12. Place a jack or support under the fuel tank (B).
13. Remove the strap bolts and straps (C).
14. Remove the fuel tank.
15. Install the parts in the reverse order of removal.