Ignition Switch: Testing and Inspection
Ignition SwitchTest
SRS components are located in the area. Review the SRS component locations and precautions and procedures before performing repairs or servicing.
1. Make sure you have the anti theft code for the audio system and the navigation system (if equipped), then write down the audio presets.
2. Disconnect the negative battery cable.
3. Remove the steering column covers.
4. Disconnect the 7P connector (A) from the ignition switch (B).
5. Check for continuity between the terminals in each switch position according to the table.
6. If the continuity checks do not agree with the table, replace the ignition switch.
7. Enter the anti-theft code for the audio system and the navigation system (if equipped), then enter the audio presets.
8. Set the clock.