4th Clutch Transmission Fluid Pressure Switch Replacement

4th Clutch Transmission Fluid Pressure Switch Replacement
1. Make sure you have the audio system and navigation system (if equipped) anti-theft codes, and write down the audio presets.
2. Disconnect the negative terminal from the battery, then disconnect the positive terminal.
3. Remove the battery hold-down bracket, and remove the battery cover, battery, and battery tray.
4. Remove the battery base.
5. Remove the intercooler cover, air cleaner housing, and air intake duct.
6. Disconnect the 4th clutch transmission fluid pressure switch connector, and remove the switch.





7. Install the new 4th clutch transmission fluid pressure switch (A) and a new sealing washer (B), and tighten the switch.
8. Make sure there is no water, oil, dust, or foreign particles inside the connector.
9. Connect the connector securely.
10. Install the air intake duct, air cleaner housing, and intercooler cover.
11. Install the battery base.
12. Install the battery tray, battery, battery cover, and battery hold-down bracket, then connect battery terminals.
13. Enter the audio system and navigation system (if equipped) anti-theft codes, then enter the audio presets, and set the clock.
14. Do the power window control unit reset procedure.