DVD-ROM Replacement
DVD-ROM ReplacementNOTE:
- When the DVD-ROM is re-inserted or replaced, a map match must be done. This system uses a white labeled DVD (possibly gray for Canada).
- Check any official Honda service Web site for more service information about the navigation system.
1. Remove the passenger's console trim.
2. Turn the ignition switch to ON (II).
3. Push the open button (A) located on the right side of the navigation unit.
4. Press the EJECT button (B).
5. Remove the DVD-ROM.
6. Insert the new DVD-ROM with the white label facing up.
7. Close the front cover. Do not turn the ignition switch to LOCK (0); watch the navigation screen until the data is down loaded to the navigation unit.
8. Do the Map Matching.
NOTE: After servicing, the front cover and PC card slot door must be closed. If you start up the navigation system with the front cover or PC card slot door open, the display will indicate an error message.