Center Panel

Center Panel Removal/Installation

Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program.

NOTE:
- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to scratch the dashboard, and related parts.

1. Remove these items:
- Right driver's dashboard panel
- Passenger's dashboard trim panel
- Center panel trim




2. Remove the center panel (A).
1. Remove the screws (B).
2. Gently pull out the panel to release the clips (C, D), then remove the panel.
3. Disconnect the climate switch connectors (E), hazard warning switch connector (F) and audio switch connectors (G).

3. Install the panel in the reverse order of removal, and note these items:
- Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
- Push the clips into place securely.
- Make sure the connectors are plugged in properly.