Power Mirror Actuator Test
Power Mirror Actuator Test1. Remove the door panel.
2. Disconnect the 8P (or 14P) connector (A) from the power mirror actuator (B).
3. Check actuator operation by connecting power and ground according to the table.
4. If the mirror fails to work properly, replace the mirror actuator.
Defogger Test
5. Check for continuity between the No. 1 [9] and No. 4 [8] terminals of the 8P [14] connector. These should be continuity.
[ ] :'07 model Right mirror
6. If the continuity is not as specified, check for:
- An open in the wire.
- A faulty mirror holder.