Air Cleaner Housing: Service and Repair

Air Cleaner Removal/Installation

1. Remove the battery upper bracket to avoid damaging the air cleaner.
2. Loosen the screw of the hose band (A).






3. Remove the bolts (B).
4. Remove the MAF/IAT sensor connector (C) and harness clamps (D).
5. Remove the air cleaner (E).
6. Install the parts in the reverse order of removal.

NOTE: Tighten the hose band screw (A) until the edge of the hose band (F) goes over the paint mark (G) up to 0.4 in. (11 mm).