Park Pin Switch Test
Park Pin Switch Test1. Remove the driver's center console lower cover.
2. Disconnect the park pin switch A/T gear position indicator panel light connector.
3. Shift the shift lever into P, and check for continuity between the park pin switch/A/T gear position indicator panel light connector terminals No. 1 and No. 2. There should be no continuity.
4. Shift out of P, and check for continuity between the connector terminals No. 1 and No. 2. There should be continuity.
5. If the park pin switch tests OK, connect the connector and install the console lower cover.
If the park pin switch fails the test, replace the park pin switch.