Operation CHARM: Car repair manuals for everyone.

Audio System Description




Audio System Description

Overview

There are two audio systems available for the RDX:

- The premium audio system is on vehicles without navigation. It includes six speakers, a subwoofer, and an XM receiver.

- The ELS audio system is available on vehicles with navigation. It includes surround sound with nine speakers (the same six that are available on the premium audio system, plus one in each rear door and in the middle of the front dash), a subwoofer, and AcuraLink (HIP/XM receiver).

The audio unit acts as the processor for all audio functions. You can select the audio functions from the front panel, the audio remote (on steering wheel), or by using the navigation voice control system. The audio display provides the current front and rear audio status. For vehicles with the navigation option, additional audio information is available by touching the audio button. (See the owner's manual for more details.)

Each audio component passes its audio signal to the audio unit. In addition, it communicates with the audio unit via the GA-Net bus. Any open connection in this circuit will cause audio and navigation functions to appear inoperative.

The audio unit has a built-in EEPROM (electrically erasable programmable read-only memory). This memory holds the audio preset data (AM/FM radio frequency, sound settings, etc.) even when the battery is disconnected.

With the ELS and the premium audio system, an audio amplifier unit powers the speakers.

The audio systems are equipped with speed-sensitive volume compensation (SVC). The audio unit receives the vehicle speed pulse (VSP) from the PCM. The system processes the speed input and increases the navigation or audio system volume level as the vehicle speed increases to compensate for the various interior noise that occurs at higher speeds. When the vehicle slows down, the volume returns to its normal level. The SVC has four settings: SVC OFF, LOW, MID and HIGH that can be adjusted using the audio unit. The SVC comes from the factory with the MID set as the default (See Owner's Manual for more information).

The 6DVD (6CD) changer output can be directed to the audio unit.

The XM radio plays through the audio unit.

A security signal is daisy-chained between the audio and navigation components and integrated into the vehicle's security system.

The optional navigation system provides voice control for the audio, the XM, and the CD player. Voice control commands are communicated through the GA-Net (audio unit). When using the TALK/BACK or route guidance (RG), the center speaker is muted and you hear the navigation instructions through the front speakers. When using the HFL/AcuraLink, the center speaker, the rear speakers, and the subwoofer are muted and the front speakers give the telephone sound. When using the HFL/AcuraLink and RG (Route Guidance) or the voice response, the center speaker, the rear speakers, and the subwoofer are muted and you hear the telephone sound and navigation instructions through the front speakers. Muting commands are passed on the GA-Net bus. For more information, see the navigation section. The outline of the audio interruption function is shown in the following table.





System Diagram





NOTE: All items may not apply to this vehicle. See the owner's manual for more information.

Audio Glossary





Audio Glossary









Audio Glossary





Audio Unit Connector for Inputs and Outputs

With ELS Audio System





AUDIO UNIT CONNECTOR A (17P)






Audio Unit Connector A (17P)





AUDIO UNIT CONNECTOR B (14P)






Audio Unit Connector B (14P)









*1: USA models

*2: '08-09 Canada models

*3: The shielded wires have a heat-shrink tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire shown on the circuit diagram.

AUDIO UNIT CONNECTOR C (28P)






Audio Unit Connector C (28P)









*1: With AcuraLink

*2: The shielded wires have a heat-shrink tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire shown on the circuit diagram.

AUDIO UNIT CONNECTOR D (32P)






Audio Unit Connector D (32P)









*: The shield drain wires have a heat-shrink tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire shown on the circuit diagram.

AUDIO UNIT CONNECTOR E (3P)






Audio Unit Connector E (3P)





*: With AcuraLink

Audio Unit Connector for Inputs and Outputs

With Premium Audio System





AUDIO UNIT CONNECTOR A (17P)






Audio Unit Connector A (17P)





AUDIO UNIT CONNECTOR B (14P)






Audio Unit Connector B (14P)





*1: With XM

*2: The shielded wires have a heat-shrink tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire shown on the circuit diagram.

AUDIO UNIT CONNECTOR C (28P)






Audio Unit Connector C (28P)









*1: With HFL

*2: The shielded wires have a heat-shrink tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire shown on the circuit diagram.

AUDIO UNIT CONNECTOR D (32P)






Audio Unit Connector D (32P)









*: The shielded wires have a heat-shrink tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire shown on the circuit diagram.

AUDIO UNIT CONNECTOR E (3P)






Audio Unit Connector E (3P)





*: With XM

Stereo Amplifier Connector for Inputs and Outputs

With ELS Audio System





STEREO AMPLIFIER CONNECTOR A (18P)






Stereo Amplifier Connector A (18P)





STEREO AMPLIFIER CONNECTOR B (28P)






Stereo Amplifier Connector B (28P)





*: The shielded wires have a heat-shrink tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire shown on the circuit diagram.

Stereo Amplifier Connector for Inputs and Outputs

With Premium Audio System





STEREO AMPLIFIER CONNECTOR A (18P)






Stereo Amplifier Connector A (18P)





STEREO AMPLIFIER CONNECTOR B (24P)






Stereo Amplifier Connector B (24P)





*: The shielded wires have a heat-shrink tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire shown on the circuit diagram.

XM Receiver Connector for Inputs and Outputs (USA, '08-09 Canada models without AcuraLink)






XM Receiver Connector A (14P)





*: The shielded wires have a heat-shrink tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire shown on the circuit diagram.

XM Receiver Connector B (2P)





Audio Switch Panel Connector for Inputs and Outputs (Without navigation)






Audio Switch Panel Connector A (20P)









*: The shielded wires have a heat-shrink tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire shown on the circuit diagram.

Audio Switch Panel Connector B (5P)





*: The shielded wires have a heat-shrink tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire shown on the circuit diagram.

Audio-HVAC Subdisplay Unit Connector for Inputs and Outputs (With navigation)






Audio-HVAC Subdisplay Unit 12P Connector





*: The shielded wires have a heat-shrink tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire shown on the circuit diagram.

Audio-HVAC Display Unit Connector for Inputs and Outputs (Without navigation)






Audio-HVAC Display Unit 12P Connector





*: The shielded wires have a heat-shrink tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire shown on the circuit diagram.