Door Lock Actuator Test

Door Lock Actuator Test

Driver's Door and Left Rear Door

1. Remove the door panel. Front Door Panel Removal/Installation

2. Disconnect the 10P connector (A) from the actuator (B).






3. Check actuator operation by connecting power and ground according to the table. To prevent damage to the actuator, apply battery voltage only momentarily.

4. If the actuator does not operate as specified, replace it.






Front Passenger's Door and Right Rear Door

1. Remove the door panel. Front Door Panel Removal/Installation

2. Disconnect the 10P connector (A) from the actuator (B).






3. Check actuator operation by connecting power and ground according to the table. To prevent damage to the actuator, apply battery voltage only momentarily.

4. If the actuator does not operate as specified, replace it.