Door Lock Switch Test

Door Lock Switch Test

Driver's door

1. Remove the power window master switch and disconnect its connector. Service and Repair

2. Check for continuity between the power window master switch 22P connector terminals.
- There should be continuity between terminals No. 16 and No. 22 when the door lock switch is in the LOCK position.

- There should be no continuity between terminals No. 16 and No. 22 when the door lock switch is in the neutral or UNLOCK position.

- There should be continuity between terminals No. 18 and No. 22 when the door lock switch is in the UNLOCK position.

- There should be no continuity between terminals No. 18 and No. 22 when the door lock switch is in the neutral or LOCK position.

3. If the continuity is not as specified, replace the power window master switch. Service and Repair






Front passenger's door

1. Remove the front passenger's power window switch. Service and Repair

2. Check for continuity between the front passenger's power window switch 14P connector terminals.
- There should be continuity between terminals No. 1 and No. 10 when the door lock switch is in the LOCK position.

- There should be no continuity between terminals No. 1 and No. 10 when the door lock switch is in the neutral or UNLOCK position.

- There should be continuity between terminals No. 1 and No. 12 when the door lock switch is in the UNLOCK position.

- There should be no continuity between terminals No. 1 and No. 12 when the door lock switch is in the neutral or LOCK position.

3. If the continuity is not as specified, replace the front passenger's power window switch. Service and Repair