Rearview Mirror Replacement

Rearview Mirror Replacement

Without Automatic Dimming Mirror

1. Release the hooks (A), then pull the mirror base cover (B) down.






2. Pull the hook (A) down to release it from the mount (B), and slide the mirror base (C) rearward, then remove the rearview mirror (D).






3. Fit the mirror base (A) over the mount (B), and secure the rearview mirror with the spring (C) and hook (D).

4. Install the mirror base cover (E) on the mirror base securely.






With Automatic Dimming Mirror

1. Disconnect the connector (A).

2. Slide the mirror harness upper cover (B) forward, then remove the mirror harness cover (C) from the mirror base (D).






3. Using a TORX T20 bit, loosen the screw, then slide the rearview mirror (A) rearward and off the mount (B).

4. Install the mirror in the reverse order of removal, and note these items:
- Before installing the mirror, remove the TORX screw, and apply medium strength type liquid thread lock to it.

- Make sure the connector is plugged in properly.