Passenger's Dashboard Trim Panel Removal/Installation

Passenger's Dashboard Trim Panel Removal/Installation

Special Tools Required

- KTC trim tool set SOJATP2014*
*Available through the Acura Tool and Equipment Program

NOTE:

- Put on gloves to protect your hands.

- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.

- Take care not to scratch the dashboard, and related parts.

1. Remove the dashboard side trim, right side. Dashboard Side Trim Removal/Installation

2. Gently pull out the trim panel (A) to release the clips, then remove the panel.

3. Install the panel in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.

- Push the clips into place securely.