Right Driver's Dashboard Panel Removal/Installation

Right Driver's Dashboard Panel Removal/Installation

Special Tools Required

- KTC trim tool set SOJATP2014*
*Available through the Acura Tool and Equipment Program

NOTE:

- Put on gloves to protect your hands.

- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.

- Take care not to scratch the dashboard, and related parts.

1. Gently pull out the right driver's dashboard center panel (A) to release the clip, then remove the panel.

2. Install the panel in the reverse order of removal, and note these items:
- If the clip is damaged or stress-whitened, replace it with a new one.

- Push the clip into place securely.