Power Window Control Module: Testing and Inspection

Power Window Control Unit Reset

NOTE: The clear procedure must be done prior to the learn procedure even if the auto function is working.

Resetting the driver's or passenger's power windows is required when any of the following have occurred:





1. Turn the ignition switch to ON (II).

2. Move the driver's or passenger's window all the way down by using the driver's window DOWN switch.

3. Open the driver's or front passenger's door.
NOTE: step 4-7 must be done within 5 seconds of each other.

4. Turn the ignition switch to LOCK (0).

5. Push and hold the driver's or passenger's window DOWN switch.

6. Turn the ignition switch to ON (II).

7. Release the driver's or passenger's window DOWN switch.

8. Repeat step 4-7 three more times.

9. Wait 1 second.

10. Confirm that AUTO UP and AUTO DOWN do not work. If AUTO UP and AUTO DOWN work, go back to step 1.

11. Move the driver's or passenger's window all the way down by using the driver's or passenger's window DOWN switch.

12. Pull up and hold the driver's or passenger's window UP switch until the window reaches the fully closed position, then continue to hold the switch for 1 second.

13. Confirm that the power window control unit is reset by using the driver's or passenger's window AUTO UP and AUTO DOWN functions.
If the window still does not work in AUTO, repeat the procedure several times, paying close attention to the 5 second time limit between steps.