Passenger's Dashboard Trim Panel Removal/Installation

Passenger's Dashboard Trim Panel Removal/Installation

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*Available through the Acura Tool and Equipment Program; 888-424-6857

NOTE:

- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
- Take care not to scratch the dashboard or the related parts.

1. Remove the right side dashboard side trim Dashboard Side Trim Removal/Installation.

2. Gently pull out the trim panel (A) to detach the clips, then remove the panel.





3. Install the panel in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips into place securely.