Power Mirror Actuator Test

Power Mirror Actuator Test

1. Remove the door panel Front Door Panel Removal/Installation.

2. Disconnect the 14P connector (A) from the power mirror actuator (B).






3. Check actuator operation by connecting power and ground according to the table.





4. If the mirror fails to work properly, replace the mirror actuator.

Defogger Test

5. Check for continuity between 14P connector terminals No. 9 and No. 8. These should be continuity.

6. If the continuity is not as specified, check for:

- An open or high resistance in the wire.
- A faulty mirror holder.