Sunroof / Moonroof: Service and Repair

Moonroof Glass Replacement

1. Close the glass fully.

2. Slide the sunshade all the way back.

3. Pry out the lids (A), remove the screws (B), and release the hooks (C), then remove bracket covers (D). Repeat on the opposite side. Remove the TORX bolts (E) with a TORX T25 bit from the glass brackets (F) on both sides.






4. Remove the glass (A) by lifting it up. Do not damage the roof panel.





5. Install the glass in the reverse order of the removal, then note these items:

- Do the glass position adjustment procedure Adjustments.
- Resetting the moonroof control unit Programming and Relearning.

6. Check for water leaks Adjustments. Let the water run freely from a hose without a nozzle. Do not use high-pressure spray.

NOTE: It is normal for some water to seep past the moonroof into the moonroof frame, and exit through the drains.