A/T Housing Park Lever Shaft Bearing Replacement

A/T Housing Park Lever Shaft Bearing Replacement

Special Tools Required

- Remover Shaft, 10 mm 07936-GE00100
- Remover Head, 10 mm 07936-GE00200
- Weight, Remover 07741-0010201
- Driver Handle, 15 x 135L 07749-0010000
- Attachment, 22 x 24 mm 07746-0010800

1. Remove the park lever shaft bearing from the transmission housing using the remover head (10 mm), the remover shaft (10 mm), and the remover weight.






2. Install a new bearing until it bottoms in the transmission housing using the driver handle and the attachment (22 x 24 mm).