B1837

DTC Troubleshooting: B1837

DTC B1837:

Driving Position Memory Recall Timeout

NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A Troubleshooting - B-CAN System Diagnosis Test Mode A.

1. Clear the DTC with the HDS.

2. Turn the ignition switch to LOCK (0) and then back to ON (II).

3. Move the steering position to the full tilt up and full telescopic out positions with the power tilt/telescopic steering switch.

4. Move both power mirrors to the full up and full left positions with the power mirror switch.

5. Move the power seat to the full front up and full rear up positions, then slide the seat all the way back and completely recline the seat-back backward with the power seat adjustment switch.

6. Put this seating position into memory with the driving position memory switch.

7. Manually move the seat away from the position just memorized.

8. Recall the memory position with the driving position memory switch.

9. Wait for 3 minutes.

10. Check for DTCs with the HDS.

Are any DTCs indicated?

YES -

Go to step 11.

NO -

Intermittent failure, the system is OK at this time. Check for loose or poor connections.�

11. Check for DTCs with the HDS.

Are any DTCs other than B1837 indicated?

YES -

Go to the indicated DTC's troubleshooting.�

NO -

Go to step 12.

12. Clear the DTCs with the HDS, and wait for 6 seconds.

13. Move the motors shown one at a time, and check the operation time.

- Steering tilt motor up and down
- Steering telescopic motor pulled and pushed
- Power mirror actuator (up, down, left, right)
- Power seat (slide forward/backward, recline forward/backward, front up-down, rear up-down)

Does any motor fail to run smoothly?

YES -

Go to the failed motor test:

- Power tilt/telescopic motor test Testing and Inspection.
- Power mirror actuator test Power Mirror Actuator Test.
- Power seat motor test Driver's Power Seat Motor Test.
If the motor is OK, check the engagement of the motor gear.�

NO -

Go to the each input test:

- Power seat control unit input test Power Seat Control Unit Input Test.�
- Power tilt/telescopic steering control unit input test Testing and Inspection.�
- Driver's MPCS unit input test Power Windows (Drivers MPCS Unit) Input Test.�