Manufacturer Code Charts: 2611

Navigation System DTC Troubleshooting: 2611

DTC 2611:

HDD Diag

NOTE:

- Check the vehicle battery condition first Battery Test.
- This navigation DTC sets when there is a problem with the HDD.
- Check any official Honda service website for more service information about the navigation system.
- Before you troubleshoot, make sure to follow the general troubleshooting information How to Troubleshoot the Navigation System.
- Check for B-CAN DTCs and resolve them before troubleshooting.

1. Clear the hard error code.

2. Turn the ignition switch to LOCK (0), and then back to ON (II).

3. Go into the Diagnostic Menu, and select the Self-Diagnosis Mode in the Select Diagnosis items menu Navigation System Diagnostic Mode.

4. Select the System Links, then select the HDD.

Is HDD status OK indicated?

YES -

Intermittent failure, the system is OK at this time.�

NO -

Replace the HDD HDD Removal/Installation.�