Immobilizer Indicator Does Not Go Off

Immobilizer System Symptom Troubleshooting - Immobilizer indicator does not go off

Immobilizer indicator does not go off

1. Turn the ignition switch to LOCK (0).

2. Connect the HDS to the data link connector.

3. Turn the ignition switch to ON (II).

4. Enter IMMOBI, then select IMMOBILIZER INFO.

5. Select SYSTEM CHECK.

Is N-1 OK indicated?

YES -

Do the gauge control module self-test. If the gauge control module is faulty, replace it Service and Repair.�

NO -

Substitute a known-good immobilizer-keyless control unit, then register it and recheck. If the symptom goes away, replace the original immobilizer-keyless control unit Service and Repair.�