HFL Switch Test

HFL Switch Test

SRS components are located in this area. Review the SRS component locations Locations, and the precautions and procedures Service and Repair before doing repairs or service.

1. Remove the driver's airbag Driver's Airbag Replacement.

2. Disconnect the 20P connector (A).





3. Measure the resistance between the terminals No. 8 and No. 19 in each switch position according to the table.

HFL-Navigation Voice Control Switch (with navigation)





HFL Switch (without navigation)





4. If the resistance is not as specified, replace the switch.

- With navigation Service and Repair.
- Without navigation HFL Switch Replacement.